Tasco 119215C instruction manual Setting Camera/Video Mode and Resolution, Set Time

Camera Setup (continued)

to confirm the month setting you’ve made. Next, set the Date:

•Press “UP” or “DOWN” to select a date between 01-31, Press “OK” to confirm. Next, set the Year:

•Press “UP” or “DOWN” to select a year between 10-30 (2010-2030), Press “OK” to confirm.

Set Time

•The “TIME”indicator (#2) will blink next (after you confirm the DATE/ YEAR settings). Press “OK” to confirm you want to set it.

•The first two digits of the 4 digit display indicate the hour (HH) and the last two digits indicate minutes (MM).

•Press“UP”or“DOWN”to select an hour between 00-23 (00=midnight, 12=noon, 23=11PM), Press “OK” to confirm. Next, you are ready to set the minutes.

•Press “UP” or “DOWN” to set the minutes between 00-59, Press “OK” to confirm.

Note: The Date & Time setting will normally be retained for a few minutes when the batteries are removed from the camera. However, you may need to reset the Date & Time after replacing the batteries, if they have been removed for a longer period of time.

2. Setting Camera/Video Mode and Resolution

This item allows you to select whether the camera takes still photos or shoots video clips when the PIR is triggered (Photo or Video Mode). You can also set the number of photos the camera takes for each PIR trigger (for Photo Mode only). Available settings are 1P, 3P, or video mode.

•The “PHOTO/VIDEO” indicators (#4 & #5) are now both blinking (alternating). Press “OK” to confirm you want to set the capture mode.

•Press the “UP” or “DOWN” button to select the Photo or Video mode icon (only the mode you select will be blinking).

10