Panasonic panasonic manual Quick S&up, Password setting

4.3.1 Quick S&up

Incoming call services for all ports (Day/Night) can be defined for each port by this seltings on the screen.

“PORT 1 (Day) ---- : Auto. Attend. (using Custom I)” indicates that incoming call service for Port

1 (Day) is set to Custom 1 and callers to this port will receive Automated Attendant service.

You can change “Auto. Attend.” to “Voice Mail”. In this case, Custom service No. will be changed from ‘ 1’ to ‘2’ automatically.

The default values of the ports depend on the position of the rotary switch you used when starting up the system (see page 4-6):

Position 0 or 2 -----Auto. Attend. (using Custom 1)

Position 3 ------------Voice Mail (using Custom 2)

If you want to select other incoming call services, see Port Assignment on page 4-37.

Note: l Applicable VPS ports depend upon the models.

TVS75 - Port 1,2

TVS 100 - Port 1-4

Step 6. Password setting

Quick Setup - Password Setting

System Administrator Password (Maximum 8 characters)

NEW PASSWORD : =

VERIFICATION : =

System	Reset/Clear	Password
(Maximum	8 characters)
	NEW	PASSWORD	: =	.
	VERIFICATION		: =

You can assign the System Administrator password and System Reset/Clear password in this screen, if necessary.

You can go to the next screen without assigning the password by pressing

[RETURN]. -

System Administrator 4-13