Panasonic panasonic manual Hardware Settings, PBX Interface Parameters

4.5.6 Hardware Settings

	Parameter	Value Range	Description/Function
		(default)
CPC Signal		I. None	Specifies the minimum time required to detect a
r		2. 6.5 msec	break in the CPC (Calling Party Control) signal
		3. 150 msec	from the PBX. The VPS detects that the line has
		4. 300 msec	been disconnectedwhen there is a break of the
		5. 450 msec	CPC signal.
		6.600 msec
		(None)

Reference

PBX Type p.479

Disconnect	1-8 set
Time	(2)
Dial Mode	1. DTMF
	2. Pulse 10 pps
	3. Pulse 20 pps
	(DTMF)

Specifies the amount of time that the line is temporarily unavailable to accessafter a call has ended.

Specifies dial mode for DTMF or Pulse.

If you specify Pulse, pulse speed(lo/20 pps) must be selected.

4.5.6.3 PBX Interface Parameters

Three types, of parameters are used to program the VPS for optimal signaling and performance with your PBX.

System Administration Top Menu + 1 + 6 -+ 3

Program - Hardware - PBX interface Menu

1.Dialing Parameters

2.lnband Signaling

3.Digit Translation Table

SELECT ITEM AND PRESS RETURN-KEY

4.5.6.3.1 Dialing Parameters

These parameters tell the VPS how to initiate and control call transfers, how to set up outgoing calls and how to control message waiting lamps on extensions. The easiest way to verify the correct code sequences for non-Panasonic KX-T series telephone systems is to manually execute the sequencesfrom a single line telephone (SLT) with your PBX.

4-78 System Administrator