Panasonic panasonic manual Fax Management, Repeat Cycle Description/FunctionReference

4.55System Parameter Settings

Parameter.	Value	Range
	(default)
Announcement	i-3	times
Repeat Cycle		(1)

Description/FunctionReference

Specifies the number of times that the intercom paging announcement should be repeated.

Example:

There is a call for <mailbox owner’s name>.

Intercom		l-10	times
Paging	Retry		(2)
Paging	Code	up	to	12
for Group 1-8		numeric
		characters		for
		each	group
		(None)

Specifies the paging retry times when the paged destination is busy or if there is no answer.

Specifies the intercom paging access code required by the PBX.

[Note]

Intercom paging group number available for each Subscriber is determined on a COS-by-COS basis.

F;e;;orn g g

Group

p.4-30

/ I I I

4.5.5.6.8 Fax Management

Transfers incoming fax calls to a fax extension.

Up to two fax extensions can be specified as the destinations of automatic fax transfer so that one serves as a backup for the other.

If the main fax extension is not available to receive a fax call, the VPS will transfer it to the alternate fax extension.

System Administration Top Menu + 1 + 5 + 6 + 8

Program - System Parameter - Others - Fax Management Menu

Automatic		Transfer		of	incoming		Fax Call ---		Disable
Main	Fax	Extension		No.		---		-	. .
Alternate		Fax	Extension			No.-			. . .
Fax	No-answer		Time (5-60 set) -					--	10
Fax	Manager		Mailbox		No. -				. . .
.Fax	No-answer		Coverage			Mode-		--	No
Fax	Notification		Mode						No

System Administrator 4-73