71
l
Utility Commands
7.1.16 Utility Command List (HELP)
The HELP command displays the list of all available utility commands.
1
Type “HELP”, then press [RETURN].
$ HELP
OFLN : System Off-line
ONLN : System On-line
PASS : Password setting
TIME : Time 8. Date setting
PSET : Report Print Out Time setting
ELOG : Device Error Log Listing
SAVE : VPS Program & Data Save (VPS -+ PC : Xmodem)
LOAD : VPS Program & Data Load (VPS t PC : Xmodem)
GPRN : Parameter Global Printing (only ‘ASCII Terminal’ mode)
VERS : Program Version Check
CREP [no] : Custom Menu Information List
[no] : Custom Menu No. (I-100)
CCLR [no] : Custom Menu Access Counter Clear
[no] : Custom Menu No. (l-100/0) (0: Clear All)
MWL [count] : MWL Retry count set (l-3)
MRL [count] : Minimum Recording Length set (O-3)
MPLT [opt] : Registered User Prompt No. List
[opt] : 1 + User Prompt.1
: 2 + User Prompt 2
7.1.17 Quick Setup (QSET)
Used to set up your VPS very roughly when you use your VPS for the first time or
after system initialization.
Type “QSET”, then press [RETURN].
You will see the same menu as “Starting the Quick Setup” in Chapter 4.
To proceed, go to page 4-8.
7-14 Maintenance