Panasonic panasonic manual Loading the Saved Data to the VPS Load

710 Utility Commands

7.1.8 Loading the Saved Data to the VPS (LOAD)

Used to restore the saved data to the VPS in case of disk crash or accidental era- sure.

The LOAD command can be executed for each data file. It may take some time to complete LOAD for all the data.

When performing this operation, please wait until the process completion indica- tion appears.

1

2

Type “LOAD”, then press [RETURN].

S LOAD

Disk Data Load (PC + VPS : Xmodem)

1:Program

2:Parameters

3:System Prompts

4:User Prompts-l

5:User Prompts-2

6:Custom Service Menu

7:Personal Greeting

Select No.:

Select the item to be restored’ to the hard disk, then press [RETURN].

To start press ‘RETURN’

3

4

Press [RETURN].

Start - - - - - Load !!

Set the data terminal to the sending (Call) mode (Xmodem). Then enter the back- up filename.

The backup data will be restored to the hard disk.

Notes: l Y-ou can cancel this command by pressing ‘\’ before entering the receiving mode, and by using the cancel command in the commu- nication software.

. l The data terminal used must be equipped with communications software that supports the Xmodem file transfer protocol.

Maintenance 7-9