3.Slide the battery door back into place. It should securely fasten to the remote.

4.Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once.

NOTE: When batteries need replacement, the active mode LED will blink 5 times upon each key- press. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.

BASIC SETUP: PROGRAMMING DEVICE CONTROL

The Titan universal remote control comes pre- programmed to operate the set-top box that is supplied by your service provider. In addition, Titan can be programmed to control four (4) additional home theater equipment devices.

NOTE: If you have another brand of set-top box that you wish to control with the STB key, you'll need to refer to “Re-Programming Set-Top Box Control” on page 22 of this manual.

NOTE: Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.

1.Turn on all of the devices that you wish to control.

2.On the remote control, press the mode key that you wish to program once (AUX, DVD, AUD,or TV, ); it blinks once.

3.Press and hold SETUP until the mode LED

SETUP blinks twice.

4.Use the “Manufacturer’s Codes” starting on page 25 to locate device type and brand name for the device you wish to control. Enter the first five-digit code for your device. If performed correctly, the mode LED blinks twice.

www.urcsupport.com

8

Page 8
Image 8
Universal Remote Control M2056-C manual Basic Setup Programming Device Control