Universal Remote Control M2056-C manual RE-PROGRAMMING SET-TOP BOX Control

RE-PROGRAMMING SET-TOP BOX CONTROL

The Titan Remote Control comes pre-programmed to control the set-top box supplied by your service provider. In addition, it is locked to prevent inadvertent deletion or change of set-top box control. In the event that you need to change the STB key to control a different brand/model of set-top box, follow these steps:

1.Using the list of Manufacturer's Codes in the back of this manual, locate the brand of set- top box that you have and be prepared to enter and test codes for step 5.

2.

3.

SETUP

4.

5.

SETUP

6.

Press STB once. It blinks once.

Press and hold SETUP until the STB key blinks twice

Enter 9 8 2. The STB key blinks four times.

Press and hold SETUP until the STB key blinks twice.

Enter the first code for your brand and type of set-top box. The mode LED blinks twice.

7.Test the code by pressing the POWER button on the remote. If the set-top box responds,

you have the correct code and are finished.

8.If the remote cannot control the set-top box, follow steps 5-8, trying each code for your brand until the remote can control the set-top box.

www.urcsupport.com

22