57 0 Delivering Messages
Two ways of message delivery are available. You can also
check whether each message has been delivered success-
fully.

57.1 Delivering Messages to All Mailboxes (Broadcasting Messages)

You can deliver an identical message to all VPS Subscribers
hEi
at the same time. This procedure is referred to as Broad-
casting Messages, and the message to be broadcast is re-
corded in the System Manager’s mailbox. This feature is
useful for informing all Subscribers about current VPS sta-
Deliver
M%ige
A-- (21
Record Deliver
Broadcat MeKige
Mcwge
co 10
step 4
tus such as remaining hard disk capacity, requesting that un-
necessary messages be erased, etc. \

1

Log in the main command menu.
2 Press m to deliver a message.
3 Press 0 to record a broadcast message.
4 Record a broadcast message and press 0.
5 Press ID to accept.

,5.7.2 Delivering ‘MeSsages to Specified Mailboxes

You can also deliver messages to more than one Sub-
scriber’s mailboxes by specifying them.
You can designate messages as private, urgent and their de-
livery date and time.
Record
Broadest
Message
Deliver
MeWige
Go to
step 4

1,

Log in the main command menu.
2 Press m to deliver a message.
3 Press a to deliver a message.
4 Enter the mailbox number of the intended recipient.
5 Press Q to accept the number.if it is correct.

6

Press 0 to record a message.
7 State your message at the tone and press 0.
8 Press 01 to accept.
9 Press 0 to specify the delivery time and the private status.

10

Press 0 to specify the delivery time.

11.

Enter the time and m.
12
Press 0 for ‘AM’ or m for ‘PM’.
5-14 System Manager