54
l
Setting COS (Class of Service) Phameters

Message Cancel for Live Call Screening Status

31 The current setting is played.
Press 0 to change the current setting (enable or disable).

32

Confirm your entry and press 0 to accept it.

Direct Mailbox Access Status

33 The current setting is played.
Press 0 to change the current setting (enable or disable).
34 Confirm your entry and press m to accept it.

Intercom Paging Group Number

35 The current setting is played.
Press 0 to change the current number.

36

Enter the group number (1 - 8).
37 Confirm your entry and press m to accept it.

Subscriber Service Prompt Mode

38 The current setting is played.
Press 0. - m to change the desired mode.
39 Confirm your entry and press m to accept it.
Tip: Step 38 -
0 System Prompt
m
User 1
Prompt
a
User 2
Prompt
m Accept the current prompt mode

Message Notification Status

40 The current setting is played.
Press 0 to change the setting (enable or disable).
If the Message Notification Status is enabled, go to step 41 - 45.
_ 41 Press 0 - Q to choose the desired Beeper Callback No.
Entry Mode or press a to accept it.
Tip: Step 41 -
You can set the way of pager access.
0 Caller Select Mode
a Without Message Mode
0 Before Message Recording Mode
m After Message Recording Mode
Q Disable All Entry Mode (Caller cannot access pager)
System Manager 5-9