4.51 Setting up Mailboxes
Parameter Value Range
(default) Description/Function Reference
l
Please insert proper number of pauses before
callback num?l;er entry code ‘X’.
Type 1. Telephone
2. Beeper
(Telephone)
Specifies the device to be notified.
M.W.N.-
Device
p.3-38
Use Device 1. Not Use Specifies the usage of Device 1.
2. Continuously 1. Not Use
3. Scheduled Device 1 is deactivated.
(Continuously) 2. Continuously
Device 1 is always active and receives
notification calls whenever a message is
recorded in the mailbox.
3. Scheduled
Device 1 is active during the scheduled
time.
Note: The Subscriber can also specify the above three parameters using a
telephone.
Number of O-9 times
Retries (0)
Specifies the number of times that a notification
call to Device 1 should be attempted after a
busy or no answer condition.
Busy Delay O-120 min.
(3)
Specifies the length of time in minutes the VPS
is to wait after a busy condition before trying to
make a notification call to Device 1 again.
No Answer
Delay O-120 min..
(30)
Specifies the length of time in minutes the VPS
is to wait after a no answer condition before
trying to make a notification call to Device 1
again.
Time frame 1,2 1-12: hour Specifies a weekly schedule for Message
MON : 00-59: minute Waiting Notification. *
TUE : AM/PM: a.m./p.m. [Note]
WED : ++: All Day This parameter is valid only when “Use Device”
THU : Space: No Use is set to “Scheduled”.
FRI : *
SAT :
SUN :
Device 2, 3
Same as Device 1

4-24

System Administrator