Prior to using for the first time
Before using your dishwasher for the first time:
1.Ensure that the electrical and water connections comply with the installation instructions
2.Remove all packaging from inside the appliance
3.Set the water softener
4.Pour 1 litre of water inside the salt container and then fill with dishwasher salt
5.Fill the rinse aid dispenser
The water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness dial and electronically, by the means of the programme selection/cancel button.
a) Setting manually
1.Open the dishwasher door.
2.Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see table).
4.Replace the lower basket.
b) Setting electronically
The dishwasher is factory set at level 5.
1. With the dishwasher switched off, press the On/Off button. |
The END OF CYCLE indicator light flashes (setting mode). |
In case salt and/or rinse aid refilling is necessary the |
corresponding indicator lights illuminate. |
If one of the washing programme indicator lights is on, this |
means that a washing programme has been set. |
The setting must be cancelled: press for about 3 seconds |
| the programme selection/cancel button; the indicator |
light of the set programme turns off and the END OF |
CYCLE indicator light flashes, indicating that the set |
programme has been cancelled and that the machine is |
now in setting mode. |
2. Press and keep pressed the programme selection/cancel |
button until the programme indicator light 1 turns on and |
programme indicator light 2 flashes, indicating that you have |
activated the water softener setting function. |
After a few seconds the END OF CYCLE indicator light |
starts flashing. |
The current level is indicated by a sequence of flashes of |
the END OF CYCLE indicator light, a sequence of |
intermittent audible signals and a pause of a few seconds |
(see chart). |
Example: 5 flashes/5 audible signals + pause + |
5 flashes/5 audible signals etc...= level 5 |
3. To change the level, press the programme |
selection/cancel button. |
Each time the button is pressed the level changes. (For the |
selection of the new level, see chart). |
Examples: |
if the current level is 5, by pressing the programme |
The dishwasher is factory set at position 2.
AA07 |
selection/cancel button once, level 6 is selected. |
if the current level is 10, by pressing the programme |
selection/cancel button once, level 1 is selected. |
The END OF CYCLE indicator light remains off for a few |
seconds and then starts flashing indicating the new |
selection is set. |
5.To memorise the operation, switch off the machine by pressing the On/Off button or wait for about 60 seconds, after which the machine will automatically return to setting mode.
| Water hardness |
| Adjusting the | Number of flashes of | Use of | |||
|
|
|
| water hardness | the END OF CYCLE | salt | ||
Clarke | °TH | mmol/l | Range | |||||
setting | indicator light and of |
| ||||||
|
|
|
|
| ||||
|
|
|
|
|
| audible signals |
| |
|
|
|
| manually | electronically |
| ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
64 - 88 | 91 - 125 | 9,0 - 12,5 | IV | 2 | level 10 | 10 | yes | |
|
|
|
|
|
|
|
| |
53 - 63 | 76 - 90 | 7,6- 8,9 | IV | 2 | level 9 | 9 | yes | |
|
|
|
|
|
|
|
| |
46 - 52 | 65 - 75 | 6,5 - 7,5 | IV | 2 | level 8 | 8 | yes | |
|
|
|
|
|
|
|
| |
36 - 45 | 51 - 64 | 5,1 - 6,4 | IV | 2 | level 7 | 7 | yes | |
|
|
|
|
|
|
|
| |
28 - 35 | 40 - 50 | 4,0 - 5,0 | IV | 2 | level 6 | 6 | yes | |
|
|
|
|
|
|
|
| |
23 - 27 | 33 - 39 | 3,3 - 3,9 | III | 2 | level 5 | 5 | yes | |
|
|
|
|
|
|
|
| |
18 - 22 | 26 - 32 | 2,6 - 3,2 | III | 1 | level 4 | 4 | yes | |
|
|
|
|
|
|
|
| |
13 - 17 | 19 - 25 | 1,9 - 2,5 | II | 1 | level 3 | 3 | yes | |
|
|
|
|
|
|
|
| |
5 - 12 | 7 - 18 | 0,7 - 1,8 | I/II | 1 | level 2 | 2 | yes | |
|
|
|
|
|
|
|
| |
< 5 | < 7 | < 0,7 | I | 1 | level 1 | 1 | no | |
|
|
|
|
|
|
|
| |
6
