Manuals / Zanussi / Kitchen Appliance / Dishwasher

Zanussi ZDT 6053 manual Hints for test centres, Cup racks position A

Models: ZDT 6053

1 24

Page 21

Hints for test centres

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart).

Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).

Load:	12 standard place settings

Rinse aid setting:	position 4 (Type III)

Detergent dosage :	5 g + 25 g (Type B)

Arrangement upper basket

Arrangement lower basket

Arrangement cutlery basket

Cup racks: position A

Page 21

Image 21

Zanussi ZDT 6053 manual Hints for test centres, Cup racks position A

Contents

INSTRUCTION BOOK DISHWASHER ZDTTechnical specifications ContentsInstallation Safety instructionsChild safety Disposal1. Upper basket stop 2. Water hardness dial 3. Salt container Description of the appliance4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray armProgramme indicator lights Audible signalsDeactivation/activation of the audible signals The control panela Setting manually Prior to using for the first timeb Setting electronically If one of the washing programme indicator lights is on, thisFilling with dishwasher salt Adjusting the doseRinse aid Filling with rinse aidIn daily use Loading cutlery and dishesThe lower basket The cutlery basket The upper basketIn case that plates are loaded in the upper basket Use of detergent Adjusting the height of the upper basketTo move to the higher position proceed as follows Fill with detergentSpecial advice General adviceDifferent kinds of detergent Detergent tabletsWashing programmes 4. To interrupt or cancel a washing programme in progress 2. Turn on the water tap 3. Setting and starting the washingTo cancel a washing programme in progress Starting a washing programmeCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationthere are problems when operating the dishwasher a fault code appearsFault code / malfunction Solutionsthe wash results are not satisfactory The dishes are not cleanThe dishes are wet and dull Water drops have dried onto glasses and dishesService and Spare Parts Customer Care Department08705 Standard guarantee conditions Guarantee ConditionsEuropean Guarantee ExclusionsBuilding-in Installation instructionsLevelling Fixing to the adjacent unitsElectrical connection Water outlet hose connectionCup racks position A Hints for test centresPage Page From the Electrolux Group. The World’s No.1 choice Electrolux plc01/05 Subject to change without notice