TWO POSITION HEAVY DUTY TOGGLE SWITCH
Two position toggle switch made by Eaton Corporation.
Part number is 8951K163. Specification ranges are 10A
250VAC and 15A 125VAC with 4 contact connections.
Nice large, red switch is 3/4" long x 1/2" wide with 2
hole mounting bracket. Switch is 2" long from mounting
bracket to mounting bracket and is 1" deep. Unused.
M2162 $2.00
SWITCHCRAFT 2 POSITION DPDT SLIDER SWITCH
Switchcraft 2 position switch operates at 3A 125vac or
.5A at 125vdc. Aluminum housing is 1 3/8" long x 3/4"
wide with 2 mounting holes. Has 9 copper contacts on
rear of switch. Throw is black and 5/16" long. Unused.
M2166 $0.75 or 10 for $5.00
LIGHTED 3-COLOR, 3-POSITION SWITCH
Measuring 3" deep x 3/4" wide, this well-constructed
switch appears to be constructed for DC operation.
It's composed of a zinc frame, opaque three-position
flip lever with a small red, yellow, and green filter
attached to be rear, in front of a 1/2" long x 3/16"
wide bulb (up=green, center=yellow, down=red). The
lever is held in position by a series of insulated spring
steel tabs that each have a solder terminal in the rear of the switch. The
switch front panel has two 1mm threaded mounting holes.
M2186 $3.50
LEVITON 125/250VAC TURN SWITCH
Two position switch, measuring 20mm
long x 18mm wide x 30mm total depth
(20mm mast height). Threaded for
mounting in a 10mm hole, includes mount-
ing hex nut and connection wiring (approx.
5" black, 25" red). Rated 3A @ 125V, 1A @ 250V,
1A @ 125VT.
M2188 $0.75 or 10 for $6.00
Electrical Components - Page 29
Surplus Shed – www.SurplusShed.com