etc.).
-Use the appliance only for dry working tasks.
-Never leave the appliance connected and unattended if is not in use. This saves energy and prolongs the life of the appliance.
-Do not use the appliance on any part of the body of a person or
animal.
Service:
-WARNING: There is a risk of fire if the appliance is not clea- ned following these instructions.
-Any misuse or failure to fo- llow the instructions for use renders the guarantee and the manufacturer’s liability null and void.
Instructions for use
Before use:
-Remove the appliance’s protective film.
-Make sure that all the product’s packaging has been removed.
-Prepare the appliance according to the function you
wish to use.
Vacuuming function:
-Fit the hose unit to the vacuum cleaner’s air intake.
-To disconnect the hose unit from the vacuum cleaner, press the two buttons on the hose joint at the same time
and pull outwards (Fig. 1).
Insertion of accessories into the appliance’s grip:
-The appliance’s grip is designed in such a way that it allows the insertion of the following accessories: (use the combination that best meets your requirements)
-Extendable extension tube: Designed to provide access to surfaces which are out of reach and make floor cleaning comfortable, its length can be adjusted by using the adjustment control.
-Lid: Specially designed for cleaning floors (both rugs, carpets and hard floors), its base has a retractable brush that can be adjusted to two heights for greater efficiency on these floors.
-Lance: Specially designed for getting into cracks and difficult corners.
-Upholstery brush: Especially suitable for cleaning
textile surfaces.
Use:
-Take the length of cable required out of the housing.
-Connect the appliance to the mains.
-Turn the appliance on using the on/off switch.
Once you have finished using the appliance:
-Turn the appliance off, using the on/off switch.
-Unplug the appliance to the mains.
-Retract the cable by pressing the roller cable button and guide the cable into the appliance.
-Clean the appliance
Cord housing
-This appliance has a cable compartment situated on its
posterior.
Carry handle/s:
-The device has a handle on the upper part so it can be
transported easily and comfortably.
Parking position:
-This appliance has one parking position for comfortable and straightforward storage.
-To use the horizontal parking position, fix the break pad hook to the hook situated on the rear side of the
appliance (Fig. 2)
Safety thermal protector:
-The appliance has a safety device, which protects the appliance from overheating.
-If the appliance turns itself off and does not switch itself on again, disconnect it from the mains supply, and wait for approximately 45 minutes before reconnecting. If the machine does not start again seek authorised tech- nical assistance.
Cleaning
-Disconnect the appliance from the mains and let it cool before undertaking any cleaning task.
-Clean the equipment with a damp cloth with a few drops of
-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
-Do not submerge the appliance in water or any other
liquid, or place it under a running tap.
Emptying the dust box:
-Empty the vacuum deposit when dust is visible though the transparent walls, when it is full, or when the va- cuum cleaner does not work to its full potential.
-In all cases, empty the deposit when the deposit full indicator shows completely red.
-Disconnect the hose from the vacuum cleaner’s air intake. (Fig 3)
-Disconnect the dust box from the appliance. (Fig. 4)
-Open the lid of the dust box and empty the contents into the appropriate waste disposal receptacle.
-Close the lid of the dust box.
-Attach the dust box to the appliance.
-Connect the hose to the vacuum cleaner’s air intake.
Changing the filters:
-Motor filter, it is advisable to be changed at least once a year or every 100 hours of the appliance’s use.
-HEPA air vent filter (High efficiency air filter that efficiently retains spores, ash, sawdust, pollen…), it is advisable to change it a least once a year or after every 100 hours of use.
-To remove filters:
Manual Exeo.indb 14
23/11/12 18:51
