Taylor 1380 instruction manual To Set Clock and Date, C/F Selection, Setup, Reset, Tips

To Set Clock and Date

1.Press and hold “TIME/DATE” for 2 seconds, then release.

2.Press “UP” or “DOWN” to change the hours. Press “TIME/DATE”.

3.Press “UP” or “DOWN” to change the minutes. Press “TIME/DATE”.

4.Press “UP” or “DOWN” to switch between a 12 or 24 hour clock. Press “TIME/DATE”.

5.Press “UP” or “DOWN” to change the year. Press “TIME/DATE”.

6.Press “UP” or “DOWN” to change the month. Press “TIME/DATE”.

7.Press “UP” or “DOWN” to change the date. Press “TIME/DATE”.

8.Clock/Date setup are complete.

9.Press “TIME/DATE” to toggle between the time and year displays.

°C/°F Selection

Press the “C/F” button on the back of the unit to switch between Fahrenheit and Celsius temperatures.

Tips

Setup:

Place the tabletop base unit indoors in a well-ventilated location away from direct sunlight with access to the outdoors through a window or other opening.

Locate the sensor probe in a dry, shaded area. Direct sunlight, direct contact with snow or ice, or other extreme temperature conditions will affect accuracy.

Reset:

To reset the weather forecaster, remove and reinstall all batteries. Repeat set up procedures.

5