6
Safety Model 632
130924
SDO NOT allow untrained personnel to operate
this machine.
SDONOT operatethe freezer unless all ser vice
panels and access doors are restrained with
screws.
SDO NOT remove any internal operating parts
(examples: freezer door, beater, scraper
blades, etc.) unless all control switches arein
the OFF position.
Failuret o follow these instructions may result in severe
personal injury to fingers or hands from hazardous
moving parts.
This unit has many sharp edges that can
cause severe injuries.
SDO NOT put objects or fingers in the door
spout. This may contaminate the product and
cause severe personal injury from blade
contact.
SUSE EXTREME CAUTION when removing
the beater asssembly. The scraper blades are
very sharp.
SCAUTION- SHARP E DGES: Two people are
required to handle the cup/cone dispenser.
Protective gloves must be worn and the
mounting holes must NOT be used to lift or
hold the dispenser. Failure to follow this
instruction can result in personal injury to
fingers or equipment damage.
This freezer must be placed on a level
surface. Failure to comply may result in personal injury
or equipment damage.
Access to the service ar ea of the unit must be
restricted to persons having knowledge and practical
experience with the unit, in particular as far as s afety
and hygiene are concerned.
Cleaning and sanitizing schedules are
governed by your state or local regulatory agencies
and must be followed accordingly. Please refer to t he
cleaning section of this Operator Manual for the proper
procedure to clean this unit.
This unit is designed to maintain pr oduct
temperature under 41_F(5_C). Any product being
added to this unit must be below 41_F(5_C). Failure
to follow this instruction may result in healt h hazards
and poor freezer performance.
DO NOT obstruct air intake and discharge openings:
The minimum required air space on all sides is 3”
(76 mm). A deflector is provided to prevent
recirculation of warm air. Failure to follow this
instruction may cause poor freezer perfor mance and
damage to the machine.
ForIndoor Use Only: This unit is designed to operate
indoors, under normal ambient temperatures of
70_-75_F(21_-24_C). The unit has successfully
performed in high ambient temperatures of up to
104_F(40_C)at reduced c apacities.
DO NOT run the unit without product. Failure to follow
this instruction can result in damage to the unit.
NOISE LEVEL: Airborne noise emission does not
exceed 78 dB(A) when measured at a distance of 1.0
meter from the surface of the unit and at a height of 1.6
meters from thefloor.