fig. 1
fig. 2
fig. 3
fig.4
1.Place the Grill & Panini Press on a dry,stable sur- face away from an open flame or hot burners. This appliance requires 1400 watts and should be the only appliance operating on the circuit. Plug the grill into a 120 volt 60 Hz AC outlet only (see fig. 1).
2.Preheat the grill.Yourgrill will not properly pre- heat unless the grill is in the closed position (see fig. 1).
The red light will turn on indicating that the appli- ance is preheating, and the green light will illuminate when the appliance is preheated and ready for use (see fig. 2).
3.Open the lid while being careful not to touch any hot surfaces such as the housing or grill plates. Use oven mitts or potholders to prevent the risk of in- jury (see fig. 3). Place food to be cooked on the bottom grill plate.
4.Lower the cover and cook the food (see fig. 4). Do not apply excessive force to close the lid. Note: The green ready light is thermostatically con- trolled and will cycle on and off during cooking to ensure that the correct temperature is main- tained.
Warning: Be careful not to touch any hot surfaces such as the housing or grill plates, or to come into contact with hot liquid in the drip tray.Extreme care must be used when operating this appliance as surface temperatures get extremely hot.
6.When you have finished using your appliance, dis- connect the plug from the wall (see fig. 5) and allow the unit to cool down completely before cleaning. Allow any hot oil or other hot liquid in the drip tray to cool before cleaning.
fig. 5
7
