22 Model C706Operating Procedures
041118
Step 4
Install the pump assembly. Toposition the pum p on the
drive hub at the rear of the mix hopper, align the drive
holein t he piston with the drive crank of the drive shaft.
Secure the pump in place by slipping the pump clip
over the collar of the pump, making sure the clip fits
into the grooves in the collar.
Figure 34
Step 5
Place the power switch in the ON position.
Figure 35
Step 6
Press the WASH key. This will cause the s anitizing
solution in the freezing cylinder to agitate. Allow it to
agitate for five minutes.
Figure 36
Step 7
With an empty pail beneath the door spout, raise the
prime plug and press the PUMP key.
Figure 37