TC MASTER X3 – PARAMETERS

METERS & CONSECUTIVE CLIPPINGS

Meters

These PPM meters (Peak Program Meters) include a very accurate Peak Hold function. Set your levels as close to 0 dB as possible, without distorting the signal. The numerical peak display gives you the exact reading you require for that.

Clicking on the meters will bring up a pop-up display with a variety of meters options.

Meter Zoom

By clicking on the magnifying glass the meter range will change from -60 dB / 0 dB to -18 dB to 0 dB

Consecutive Clippings

The CONSECUTIVE CLIPPINGS display is a highly accurate tool which will display any and all clips in your material. The numerical reading even counts single clips. The meters give you an additional visual feedback after the 3rd consecutive clip.

Like in the METERS display, clicking on the clipping meters will bring up a menu with a variety of options.

LEFT & RIGHT INPUT

Adjust the signal so you leave the smallest possible headroom and get the compressor working. The separate faders for left and right channel assist you

fixing level differences between the channels.

To ungroup the faders, hold the <SHIFT> key on your computer keyboard while moving a channel fader.

OUTPUT

Sets the Output level. Make sure you set the OUTPUT LEVEL properly, i.e. make sure there are no clips displayed in the OUTPUT METERS.

Output-Clips are only displayed, if DIGITAL CEILING is set to 0 dB.

TC MASTER X3 – PARAMETERS

FREQUENCY/LEVELS

Here you set the crossover frequencies and compressor gains for the 3 bands. You could adjust the crossovers by clicking/holding in the numerical fields and moving the mouse to left/right. A third possibility is to click into one of the three blocks and move the mouse to left/right.

The minimal bandwidth of a band is 2 octaves. The gains are adjusted by clicking into one of the 3 blocks and simultaneously moving the mouse up or down.The exact gain is displayed numerically right above the block.

Holding [Shift] while dragging, will allow for simultaneous level editing when moving the mouse up or down.

Holding the [Option] key while clicking on a band block, will reset its gain value to 0 dB.

Holding the [Option] key while clicking on the background, will reset all bands.

DISPLAYS

BAND 1/2/3

These displays give you a visual feedback on the dynamics processing applied to each band. Clicking on the display will activate the SOLO function, clicking again will deactivate it again.

The LEDs below the display show if the band’s Expander or Limiter section are active. The Gain Reduction Meter displays how much the compressor is working on the signal.

10

11

Page 5 Page 7
Page 6
Image 6
TC electronic SDN BHD manual TC Master X3 Parameters
Page 5 Page 7

Master X3 specifications

TC Electronic SDN BHD Master X3 is a cutting-edge digital audio processor designed for both professional and semi-professional audio setups. Renowned for its intuitive interface and versatile capabilities, the Master X3 stands out as an essential tool for sound engineers, musicians, and producers alike.

One of the primary features of the Master X3 is its comprehensive multi-band dynamics processing. This allows users to control the dynamics of audio signals with precision across different frequency bands. By splitting the audio spectrum into multiple bands, users can manage compression, expansion, and limiting with unparalleled accuracy, tailoring the sound to achieve the desired sonic character.

The Master X3 also incorporates advanced algorithmic technologies that maximize audio quality. Its high-quality DSP engines ensure that audio processing is executed with minimal latency, providing real-time feedback and responsiveness during live performances or studio sessions. This technological sophistication is paired with an easy-to-navigate user interface, featuring a clear visual display, intuitive controls, and an extensive library of presets that aid users in achieving professional results without an exhaustive learning curve.

Another hallmark of the Master X3 is its flexibility in routing and connectivity options. With various input and output configurations, the device can seamlessly integrate into diverse audio systems. This adaptability makes it suitable for numerous applications, from live sound reinforcement to studio mixing and mastering. The unit is designed to handle both analog and digital signals, ensuring compatibility with a wide range of devices.

Additionally, the Master X3 features robust metering options, providing real-time visual feedback of audio levels and dynamics. This monitoring capability is essential for ensuring optimal performance and preventing signal distortion, making it a reliable partner in any audio project.

For those seeking to elevate their audio production to new heights, the TC Electronic SDN BHD Master X3 delivers an impressive suite of features. Its combination of high-performance processing, user-friendly design, and versatile connectivity options make it a premier choice for anyone passionate about audio excellence. Whether on stage or in the studio, the Master X3 is engineered to deliver pristine sound quality and unmatched control.
Top Page Image Contents