Teac 1006.MA-1087A Timer, Setting the timer, To turn on the timer, To turn off the timer

Timer

TIMER .//

SET

<The unit can be programmed to turn on at a specified time. The unit will turn off after 60 minutes of reaching the specified time.

<Adjust the clock before setting the timer (see page 11).

If the power supply is interrupted, the settings kept in memory (clock, preset stations, timer setting) will be erased.

Setting the timer

1Press the TIMER SET button.

The clock and the Timer indicator ( ) blinks on the display.

<If no button is pressed for about 1 minute, the timer setting mode will be cancelled.

2Set the start time using the Skip buttons (.//), and then press the TIMER SET button.

3Select a source (iPod or TUNER) using the Skip buttons (.//), and then press the TIMER SET button.

<You cannot select “AUX”.

4Set the volume using the Skip buttons (.//), and then press the TIMER SET button.

The volume for timer operation is adjustable from 10 to 40.

Setting the timer is now completed.

STANDBY/ TIMER

ON

To turn on the timer

1After setting the timer, press the TIMER button to turn the timer on.

The Timer indicator ( ) appears on the display.

2Prepare the source.

When the source is set to “iPod”, insert an iPod.

When the source is set to “TUNER”, tune in a station.

3Press the STANDBY/ON switch to turn the unit off (standby).

Don’t forget to turn the unit off (standby), or the timer won’t work.

<Playback volume will gradually increase up to your set volume when the unit is turned on by timer.

<If the source is set to “iPod” but no iPod is set, the unit will turn on into TUNER mode.

<When the source is set to “TUNER” and the unit turns on, it will tune in to the station you selected last time.

To turn off the timer

When you don’t use the timer, press the TIMER button to turn it off.

The Timer indicator ( ) disappears from the display.

Press the TIMER button again to turn it on.

20

21