Getting Started

Setting the Clock

The SR-LXi comes mounted with an adapter “60GB (color) + Photo 40GB/60GB”. To play your iPod through the SR-LXi, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below.

1. Remove the adapter from the Dock

of the SR-LXi.

3.Insert the adapter into the Dock of the SR-LXi.

Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight “click” is heard indicating the adapter is inserted correctly.

1

TIMER .// CLOCK

ADJ

Hold the left and right sides of the

adapter and gently pull it up.

2. Choose the Dock adapter that fits

your iPod mobile digital device.

“Video 30GB” for iPod with video (30

GB).

“Video 60GB” for iPod with video (60

GB).

“nano” for iPod nano.

“mini” for iPod mini.

“20GB (color) + Photo 30GB” for iPod

with color display (20GB, 30GB, U2

Special Edition).

“60GB (color) + Photo 40GB/60GB” for

iPod with color display (40GB, 60GB).

“20GB + U2” for iPod with Click Wheel

(20 GB, U2 Special Edition).

“40GB” for iPod with Click Wheel (40 GB).

<Use a commercially available adapter to play iPod with dock connector.

2

<When you need to remove the adapter, hold the left and right sides of the adapter and gently pull it up.

<When you don’t use the Dock, use the supplied cover for the Dock to prevent dust from settling on the Dock.

Compatible iPod Software

In case your iPod will not work with the SR- LXi or with the remote control unit, software update may solve the problem.

Visit the Apple website and download the latest iPod Software.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

1Press and hold the CLOCK ADJ button for more than 3 seconds and release it when the time display starts blinking.

<If you leave the unit idle for about 1 minute, the clock setting mode will be cancelled.

2Press the skip buttons (.//) to adjust the clock, and then press the CLOCK ADJ button.

<Hold down the skip button (. or /) to adjust the clock continuously.

The clock starts from 00 second.

3Press the skip buttons (.//) to select Year, and then press the CLOCK ADJ button.

4Press the skip buttons (.//) to select Date, and then press the CLOCK ADJ button.

If the power supply is interrupted, the settings kept in memory (clock, preset stations, timer setting) will be erased.

10

11