Playback
1Press the POWER button to turn the unit ON.
<If a power amplifier is connected, turn on the power amplifier last..
2Press the SOURCE button repeatedly to select a source.
Each time the SOURCE button is pressed, the source changes as follows:
USB (USB input for computers)
COAXIAL | (Coaxial digital input) | |
|
| |
|
|
|
OPTICAL | (Optical digital input) | |
|
|
|
LINE 1 | (Analog input) | |
|
| |
|
|
|
LINE 2 | (Analog input) | |
The input indicator of the selected source lights up..
<The input indicator blinks when the input signal is not digital audio data or the format of the audio signal is not compatible with this unit, such as Dolby Digital, dts, or AAC.. If this happens, set the digital OUT setting of the connected device to PCM audio output..
<To select "USB" to play back music files stored on a computer, install dedicated TEAC driver software on the computer before connecting the unit.. (page 12)
3Start playback on the connected source device. See the connected device's manual for detailed information about using the device..
4Adjust the volume.
Turn the volume knob (VOLUME) or use the VOLUME buttons on the remote control unit to adjust the volume to the appropriate level..
11