Speaker Connection
Right Speaker | Left Speaker |
CAUTION before connection
<After all other connections are complete, connect the power cord's plug to the wall socket..
<Read the instructions of each device that you intend to use with this unit..
Caution
<Check the impedance of your speakers.. Connect speakers with an impedance of between 4 ohms and 8 ohms..
<The red speaker terminals are + (positive) and the black speaker terminals are – (negative).. Generally, the + side of the speaker cable is marked to make it distinguishable from the
– side of the cable.. Connect the marked side to the + terminal and the unmarked side to the black – terminal..
<The metal portions of the two separate wires should not touch or an electrical short may occur.. Shorted wires can create a fire hazard or induce a failure in your equipment..
<Be sure to insert each plug securely.. To prevent hum and noise, avoid bundling the cables together with the AC power cord or other cables..
How to connect:
1Turn the terminal cap counterclockwise to loosen it. The speaker terminal caps cannot be fully removed from the product.
2Insert the wire into the terminal and turn the terminal cap clockwise to securely connect it:
<Make sure none of the wire insulation is under the terminal and only the bare, stripped wire is touching the terminal..
3Make sure the cable is fastened firmly by pulling the cable lightly.
8