Teac CD-RW890 To check the programmed order, To add a track to the end of the program, To overwrite the program

When the selection of track numbers has been finished, press the Play (y) button to start program playback.

The “PROGRAM” indicator stops blinking and lights up. Playback of the program starts.

To check the programmed order

In the stop mode, press the PROGRAM CHECK button repeatedly to show the track numbers that have been stored in memory.

<This cannot be used while the “PROGRAM” indicator blinks.

To add a track to the end of the program

Press the PROGRAM button in the stop mode.

Press the numeric button to select a track.

track 7: track 10:

The track is added to the end of the program.

To overwrite the program

In the stop mode, press the PROGRAM button repeatedly until the program number to be changed appears on the display.

Press the numeric button to select a track.

track 7: track 10:

The track is overwritten to the selected track.

Continue to the next page

15