Erasing All Tracks In Refresh Mode (CD-RW)

Erasing in the refresh mode takes time. It is recommended to use “ERASE DISC” when erasing all tracks.

A disc that causes an error during recording may be recovered by erasing all tracks on the disc in the refresh mode.

Load a recorded CD-RW.

Press the ERASE button three times.

“REFRESH” appears on the display.

<Each time the ERASE button is pressed, the display changes as follows:

ERASE # (#: The last track number)

ERASE DISC

REFRESH

Total number of tracks and total playback time

<If only one track is recorded, “ERASE” and the last track number do not appear. The display changes in the following order:

ERASE DISC

REFRESH

Total number of tracks and total playback time

<Press the Stop (H) button to stop erasing if you need.

<If a finalized disc is inserted, “UNFINALIZE” appears. To erase the track(s), unfinalize the disc first.

Press the Play (y) button to start erasing.

All tracks will be erased.

The time required appears on the display.

When the operation has been finished, the display returns to the track/time display.

<Never turn the power off nor unplug the power cord during erasing.

<During erasing, no buttons will work.

<This operation cannot be undone. Before erasing the tracks, make sure that you really want to erase them.

24