CSubwoofer
Make the connection between the “TO SUBWOOFER” and “FROM MAIN” sockets using the supplied cable.
DAUX IN
You can connect a DVD player, VCR etc. to this unit. Connect the component with RCA pin cords.
Make sure to connect the white plug to the white jacks (Left) and the red plug to the red jacks (Right).
ESPEAKERS
Connect the left speaker’s plug to L, and the right speaker’s plug to R.
<When using speakers other than those supplied with the system, the impedance should be 3 ohms or more.
<Do not connect anything other than speakers to these terminals.
FAC Power Cord
Plug this AC power cord into an AC wall socket.
Wall Mounting
You can mount the main unit and/or the left and right speakers on a wall.
Precautions
<Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the main unit and the speakers too far from the subwoofer.
<Drill holes into solid wall support, such as wooden frame or concrete wall.
<TEAC supplies these brackets as a convenience to the product owner. Consult your local building codes and exercise all necessary caution when mounting these brackets. If you are unsure how to use the supplied brackets, consult with a local tradesmen or building supply expert.
To hook on the wall
1Use the supplied template to determine drilling points.
2Secure the brackets on the wall using the supplied screws.
<As a convenience, a set of tapered plastic anchors is supplied. If you chose to use these anchors, drill a pilot hole using a 6mm drill bit then tap the anchor into the pilot hole.
Only use these anchors if they are appropriate for the materials onto which the unit is to be mounted. Consult your local hardware store if you are uncertain.
Note:
Before going on, make connections between the main unit and the speakers by referring to page 4.
3Hang the main unit and/or the speakers to the mounting tabs.
Main Unit | Speaker |
3
3
2 | 2 |
ENGLISH
5
