Teac PD-D2610 owner manual Programed Playback, To check the programed order

Programed Playback

2

3

1 4

5

<Up to 32 tracks can be programed in the desired order.

<If the shuffle mode is on, the PROGRAM button does not work.

1Press the PROGRAM button in the stop mode.

“PROGRAM” lights on the display.

2If you want to select a track/file in another disc, press the corresponding DISC NO. button (1-5).

3Press the numeric button to select a track or file.

track/file number

disc number program number

You can also use the SKIP buttons (.//) to select a track.

<If the unit has not yet detected the contents of the disc, you can not enter 3-digit numbers with the numeric buttons. In this case use the SKIP buttons (.//).

<You can not also enter numbers other than those detected as specifying tracks/files in the disc.

<Before you press the numeric buttons, “A” is displayed instead of the track/file number. If you press the PROGRAM button without pressing the numeric buttons, you can program a whole disc.

4Press the PROGRAM button to enter your selection.

Repeat steps 2 to 4 to program more tracks/files.

<If you made a mistake, press the CLEAR button. The last programed number will be deleted.

<Up to 32 tracks/files can be programed.

5 When programing has been finished, press the PLAY button to start programed playback.

When playback of all the programed tracks has finished, or if one of the following buttons is pressed, the programed playback stops:

STOP, OPEN/CLOSE

But the programed contents aren’t lost. You can return to the programed playback by pressing the PLAY button.

<If the power is turned off, the programed contents will be erased.

<When in the program mode, the following buttons don’t work:

SHUFFLE, DISC NO., DISC SKIP

To check the programed order

In the stop mode, press the PROGRAM CHECK button repeatedly. The track and program numbers will be shown on the display.

12