Connection

Connection

PD-D2610

A

B

C

OPTICAL COAXIAL

DIGITAL

IN

Digital Audio Device (CD Recorder, etc.)

L R

CD IN

Amplifier

CAUTION:

<Switch off the power to all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

ADIGITAL OUT terminal

Connect the digital output terminal to the digital input terminal of a digital device such as a CD recorder, MD deck, etc. Use a commercially-available optical or coaxial digital cable.

<Keep the supplied cap to cover the optical digital terminal when it is not in use.

BLINE OUT jack

Analog 2-channel audio signal is output from this jack. Connect this jack to the CD input jack of the amplifier with an RCA cable.

Make sure to connect :

white plug q white jack (L: left channel)

red plug q red jack (R: right channel)

CAC Power Cord

After all other connections are complete, connect the plug to the AC wall socket.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

Grasp the plug, not the cord when plugging or unplugging the power cord.

8

Page 8
Image 8
Teac PD-D2610 owner manual Connection, ADIGITAL OUT terminal, BLINE OUT jack, CAC Power Cord