Teac R-3 owner manual When the current source is AUX, select AUX or BUZZ

Models: R-3

1 28
Download 28 pages 39.23 Kb
Page 23
Image 23
When the current source is AUX, select AUX or BUZZ.

5Turn the MULTI JOG knob to select RADIO or BUZZ and then press the ENTER button.

When the current source is AUX, select AUX or BUZZ.

RADIO: DAB or FM (selected source)

AUX: AUX

BUZZ: buzzer

<If no DAB staion is available but you have selectted ‘RADIO’ in DAB mode, the timer will start the buzzer instead of DAB radio.

6Press the ENTER button to complete the timer setting.

‘ ’ appears on the display.

The unit will turn on at the specified time every day and after 60 minutes the unit turns off.

For the timer to start the radio, tune in a station and adjust the volume before turning the unit off.

For the timer to start the buzzer, adjust the volome before turning the unit off. For the timer to start an external source, connect it and prepare for the timer playback.

Don’t forget to turn the unit standby, or the timer won’t work.

<When the unit is turned on by the timer, ‘ ’ blinks on the display.

<If the unit is disconnected from the power supply and the batteries have been completely discharged for about an hour, clock and timer settings will be lost.

23

Page 23
Image 23
Teac R-3 owner manual When the current source is AUX, select AUX or BUZZ