Teac R-3 owner manual Astandby/On

ASTANDBY/ON

Use this button to turn the unit on or standby.

The indicator lights when the unit is turned on.

<When the batteries become discharged and need to be recharged, the STANDBY/ON indicator blinks at regular intervals.

<Even when the unit is standby, the indicator flashes at regular intervals while charging the batteries.

BVOLUME

Turn this knob to adjust the volume level.

C1-5 button

Use these buttons to select a preset station.

DTUNING/MULTI JOG

Turn this knob to tune in a station.

This knob is also used to adjust the time, change timer settings, etc.

EENTER

Use this button to enter the selection.

FALARM

Use this button to enter the timer setting mode or to check the timer status.

GSNOOZE

When the unit is turned on by the timer, press this button to turn the unit standby for 5 minutes.

HSLEEP

Use this button to enter the sleep timer setting mode or check remaining time.

IFUNCTION (DAB/FM/AUX)

Use this button to select DAB, FM or AUX.

When a component is connected to the AUX IN jack, select AUX to listen to the external source.

JDisplay

KINFO/MODE

In DAB mode use this button to choose the type of information displayed.

Press and hold this button for longer than 2 seconds and press the ENTER button to enter the ‘Manual Tune’ mode. To tune in a station in L-band, use this mode.

LAUTO SCAN

In DAB mode use this button to start scanning the stations that you can listen to in the UK.

Press and hold this button for more than 2 seconds to start ‘Full Scan’ (all the Band III).

9