Listening to the Radio

1 2 4 3

4Adjust the volume using the VOLUME buttons

FM MODE button

Pressing this button alternates between STEREO mode and MONO mode.

1Press the STANDBY/ON switch to turn the unit on.

<The unit turns on with the source that was last selected.

2Press the FUNCTION button to select FM or AM.

3Select the station you want to listen to (auto selection).

Hold down the TUNING button (up or down) of the remote control unit until the frequency display begins to change. When a station is tuned in, the tuning process will stop automatically.

<To stop the auto selection, lightly press the TUNING button.

Selecting stations which cannot be tuned automatically (manual selection)

When the TUNING rotary knob is turned, the frequency changes by a fixed step. Turn the TUNING rotary knob repeatedly until the station you want to listen to is found.

<When using the remote control unit, repeatedly press the TUNING button (up or down).

The volume is adjustable from MIN (00) to MAX (22). You can hold down the VOLUME button (+ or –) to reduce or bring up the volume continuously.

If the AM reception is poor

Turn the unit around to find the best position for AM stations. The AM antenna is built in within the cabinet so rotating the cabinet may improve the reception.

If the FM reception is poor

For the best reception, rotate the extendable antenna until you receive stations clearly.

STEREO

FM stereo broadcasts are received in stereo and the “STEREO” indicator lights in the display.

<If the sound is distorted and the “STEREO” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode.

MONO

To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise.

ENGLISH

14

15