Listening to iPod

Insert the iPod into the Dock of the TD-X250i.

Then press the Play/Pause button (y/J) on the iPod. The

TD-X250i will automatically turn on and start playback from the iPod’s music list.

<If the iPod that is in playback mode is inserted into the Dock, the TD-X250i will automatically turn on and start playback of the iPod.

<Make sure to use an appropriate Dock adapter (see “Getting started” on page 9).

<The battery of the iPod is recharged to the full whenever the iPod is docked and the TD-X250i is connected to the AC power supply.

<When headphones are plugged into the iPod, sound comes from both the speakers of the TD-X250i and the headphones.

<The Stop button (H) doesn’t work in iPod mode.

To select iPod mode

Select “iPod” using the FUNCTION button. If an iPod is already docked, playback will start.

When no iPod is docked, the iPod indicator on the display blinks.

In iPod mode, press the Play/Pause button (G/J) to start or pause playback.

To suspend playback temporarily (pause mode)

Press the Play/Pause button (G/J) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button (G/J) again.

To skip to the next or a previous track

During playback, press the skip button (.or/) repeatedly until the desired track is found. The selected track will be played from the beginning.

<When the . button is pressed during playback, the track being played will be played from the beginning. To return to the beginning of the previous track, press the . button twice.

Search for a part of a track

During playback, hold down the skip button (.or/) for more than 2 seconds and release it when the part you want to listen to is found.

14