AAM loop antenna
Position the antenna for the best sound.
If you want, you can hook the AM antenna on a wall as shown below:
BFM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position for reception. This antenna may need to be repositioned if you move your unit to a new location.
FM Outdoor Antenna
In an area where FM signals are weak, it will be necessary to use a
Outdoor FM Antenna (75Ω)
CSubwoofer
Connect the “TO SUBWOOFER” and the “FROM MAIN” sockets using the supplied cable.
<Connect the Connectors in the direction as figured.
DSPEAKERS
Connect the left speaker’s plug to L, and the right speaker’s plug to R.
<If not using the included speakers, make sure the speakers you use are at least 4 Ω impedance.
<Do not connect anything other than speakers to these terminals.
EAC Power Cord
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord.
FPOWER switch of the Subwoofer
Use this switch to turn the system on or off.
The equipment draws a nominal amount of power from the AC outlet even with its POWER switch in the OFF position.
<If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased.
To avoid loosing your settings, it is advisable to keep this switch ON when not in use.
GAUX IN
You can connect a portable audio player to this jack. Connect the LINE OUT or PHONES jack (audio output jack) of the player using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must adjust the volume of the
7