Basic operation
1Minimize the volume.
Use the VOLUME knob or the remote control VOLUME buttons to minimize the volume.
−∞ dB: Minimum volume 0 dB: Maximum volume
2Set the POWER switch to ON.
3Turn the INPUT SELECTOR knob to select the input source.
ooIf digital audio signals input through OPT1, OPT2 or COAX inputs are in a format other than PCM (e.g.
Dolby Digital, DTS, AAC), the input indicator will EN blink. Since this unit only supports the input of PCM format signals, confirm that the digital output of
the connected equipment is in PCM format. Some devices convert signals into PCM format before out- put. See the operation manuals for the connected devices.
ooBefore connecting a computer and selecting USB, install the dedicated driver on the computer (see p. 14). Playback from a computer that does not have this driver installed is not possible.
4Operate the playback device.
Refer to the operation manual of that device.
5Adjust the volume.
−∞ dB: Minimum volume 0 dB: Maximum volume
Start playback on the source and use the VOLUME knob or remote control VOLUME buttons to adjust the volume to its optimal level.
The indicator for the selected source lights.
13