Before use

VPlacement precautions

ooDo not put anything on top of the unit.

ooAvoid placing the unit in direct sunlight or close to any source of heat, such as a radiator, heater, open fireplace or amplifier. Also avoid locations that are subject to vibrations or exposed to excessive dust, cold or moisture.

ooPlace the unit in a stable location near the audio system that you will use with it.

ooAs the unit could become warm during operation, always leave sufficient space around it for ventilation. When installing this unit, leave a little space (at least 3 cm or 1.2") between it and walls and other devices in order to allow good heat dissipation. When placing it in a rack, for example, leave at least 5 cm (2") open above it and 10 cm (4") open behind it. Failure to provide these gaps could cause heat to build up inside and result in fire.

ooYou may stack this unit with a PD-501HR or other 501 series units. However, if heat should cause the protection circuit to be activated and sound output stops suddenly, place this unit on top and with sufficient distance between it and walls and other devices in order to improve heat dissipation.

ooDo not move the unit during use.

ooThe voltage supplied to the unit should match the voltage printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

ooDo not open the body of the unit as this might result in damage to the circuitry or cause electric shock. If a foreign object should get into the unit, contact your dealer or TEAC customer service.

ooWhen removing the power plug from the wall outlet, always pull directly on the plug; never yank on the cord. ooDepending on the electromagnetic waves of television broadcasts, interference might appear on television screens when this unit’s power is on. This does not mean that this unit or the TV is malfunctioning. If this

occurs, turn this unit’s power off.

Maintenance

If the surface of the unit becomes dirty, wipe it with a soft dry cloth. If the unit becomes very dirty, dampen a soft cloth slightly with a diluted neutral cleanser and thoroughly wring out any excess fluid before using the cloth to wipe the unit.

QFor your safety, disconnect the power cord from the socket before cleaning.

ooNever spray liquid directly on the unit.

ooDo not use thinner or alcohol as they could damage the surface of the unit.

ooAvoid allowing rubber or plastic materials to touch this product for long periods of time, because they could damage the cabinet.

6