PMD8129 Models
Note: When drilling, the drill bit can become stuck.
If this happens, a very high torque will be produced. Always take care to hold the drill firmly to prevent possible damage or injury.
TROUBLESHOOTING TIPS:
DRILL DOES NOT WORK?
• Recharge the battery
CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING?
•Check that battery pack is properly connected to the battery charger
•Check that the AC Adaptor is properly connected at both ends
Maintenance
Clean the Drill regularly. Before cleaning, remove the battery pack and any accessories (bits etc.).To clean, use ONLY a mild soap and damp cloth on the housing. Never immerse drill in any kind of fluid. Do not use any solvents or harsh abrasives on the drill housing as this may cause damage to the unit.
Always keep the ventilation openings clear.
NOTE: All bearings in these tools are lubricated with a sufficient amount of
No further lubrications required.
CAUTION: DO NOT keep the trigger switch pressed in with tape or any other permanent means or the circuit will not function properly. A malfunction may result, possibly causing overheating or damage to the unit.
Do not open the drill, battery or battery charger.There are no user serviceable parts. Opening the unit will void the warranty.
ACCESSORIES
Please refer to section “ASSEMBLY”
QUESTIONS?
If you have any questions about this product, please contact our Customer Service Department at (888) 231 4022, 9 am to 5 pm EST, Monday Friday or visit our website at: www.colemanpower.com.
Owner’s Manual
