- Use the screws included with your television.
or
Choose the correct screw set among the sets included with the TV stand, (M4 x 12 or M4 x 30 or
M5x12orM5x30orM6x12orM6x30orM8x16orM8x40)(by hand threading them into the
threaded insert on the back of the TV,if you encounter any resistance, stop) and if necessary spacer
(HA561 or HA619 or HA569) (between the TV and the bracket hook) and washer (IHA0440 or IHA0441
or IHA0442 or IHA0443 or HA356 or IHA0438or IHA0439) (between the screw and the bracket hook).
WARNING:
DONOT LAY THE TV FACE DOWN ON THE GLASS, lean it up against a wall or other solid surface. Laying the TV down on the glass may cause permanent
damages.Place the rect. bracket hooks (IMC0208-BP) vertically as close to center of the TV as possible before installation. Thread bolts with your ha nd into
yourTV back.
1- Hook the rect. bracket hooks (IMC0208-BP) over the top of the mounting frame.
2- Let the bottom of the rect. bracket hooks (IMC0208-BP) rotate in under the bottom of the mounting frame. This process is shown
in Detail #6.
3- Once the TV is in place, insert the fastening bolt (IHA0400) (fasten until secure) into the holes under the brackets as shown in Detail #7.
DETAILS #7DETAILS #6IHA0400
IMC0208-BP
IHA0400
OPTION 3
7
IMC0208-BP
mounting frame
wall
CAUTIONS :
For a wall mount, this product is designed to mount a flat panel TV no larger than 52” (1320mm) diagonal and weighing up to 135 lbs (61 kgs).
Use of this product with a larger TV could cause damages, severe injury or death.
NOTE:
TECHCRAFT makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not included,
please consult your local hardware store or contact us at www.techcraft.net
14