television set
sound adjustments
Balance
Select the Balance line (red key).
Balance the sound between the left and right channels.
Repeat the same procedure to select and successively adjust the Bass and Treble.
HEADPHONES
Press briefly
The following menu is displayed :
HEADPHONES is selected.
If this is not the case, select the Contents line with the red
button 
and HEADPHONES with 
.
Select the Headphones line (red key).
You can then adjust the volume for the headphone. This operation also sets the output level of the HIFI
jacks 
(CINCH).
Note : When the transmission is multilingual (DUAL) or an AV programme, the following menu appears. It is possible to select SOUND 1 or SOUND 2 in the headset.
Select the Source line:
then select | Sound | 1 |
or |
|
|
Sound | 2 |
AV
The sound output on sockets AV1 and AV2 must be adjusted according to the type of headset connected.
Press briefly.
The following menu is displayed :
AV is selected.
If this is not the case, select the Contents line with
the red key | and AV with |
|
|
|
| . | |
|
|
| |||||
Select the AV Device line (red key). |
| ||||||
Then selected |
| = stereo VCR |
| ||||
Stereo |
| ||||||
|
| = mono VCR |
| ||||
| Mono |
| |||||
Selecting stereo permits simultaneous recording of both languages of a bilingual programme on a stereo video recorder : Sound 1 on the left track and Sound 2 on the right track.
The sound available at the AV1 and AV2 outputs must be adjusted according to the type of device connected.
Press to remove the menu from the screen.
LOUDSPEAKERS HEADPHONES AV
Headphones
GB
Headphones
Source | Sound 1 | Sound 2 |
Headphones |
|
|
LOUDSPEAKERS HEADPHONES AV
AV Device | Stereo Mono |
LOUDSPEAKERS HEADPHONES AV
AV Device | Stereo Mono |
15