Daily viewing

Daily viewing

Sound Settings

The television set fitted with a Dolby Pro Logic decoder lets you create a cinema studio sound quality in your own home with a coded Dolby Surround signal or you can enjoy special sound effects (with a stereo or mono signal) by connecting 2 pairs of loudspeakers (on some models), one pair of speakers or simply using the sound facilities of the television set.

Turn on the main switch and connect the speakers to the appropriate sockets. The black terminals of the speakers must be connected to the black terminals of the television set (likewise for the red terminals) (see Speaker Connection, page 23).

Display the SUMMARY using the key on the remote control. Select the line marked Sound. Validate using . The SOUND menu is displayed.

Select and set the proposed options. Use the information below to help you.

Sound settings :

Use this menu to set the sound effect of your television.

To display the SOUND SETTINGS menu, select

the line and press .

According to your set-up, activate:

-the external bass box ( Ext. subwoofer line).

-the external line* (Ext. amplifier line).

-the rear speakers (Surround line).

Test balance

Activate this function, then set the following to the same sound level (according to your set-up):

-the balance between the left and right channels (Balance L/R line)

-the volume of the central channel (Centre volume line)-the volume of the rear speakers (Surround volume line)

Return

To return to the SOUND menu

*Ext. amplifier

 

SOUND

Return

 

 

 

 

Sound settings

 

 

 

 

 

 

 

 

 

Sound type

 

 

Stereo
Sound mode

 

 

Pro Logic
Treble centre

 

 

 

 

 

 

 

 

 

 

 

 

Bass centre

 

 

 

 

 

 

 

 

 

 

 

 

Treble

 

 

 

 

 

 

 

 

Bass

 

 

 

 

 

 

 

 

 

 

 

 

 

SOUND SETTINGS

Return

Ext. subwoofer

Ext. amplifier

Surround

Test balance

Balance L/R

Centre volumeSurround volume

You can use external amplifiers instead of the television configuration (see Speaker Connection, page 23):

Amplifier with a Dolby Pro Logic decoder:

-Connect the left (L) and right (R) CINCH plugs from the television set to your amplifier.

-If there are rear speakers (Surround) disconnect them from the television set.

-Select Normal mode from the SOUND menu.

-Set the sound using the amplifier.

17