Remote control
Video Recorder Functions
You can use your remote control for some functions on most brands of video recorders. Before using it, you must enter the code of your video recorder in the table on the next page, following the adjustment procedure described below.
You may find that this remote control is not compatible with your brand of video recorder or that some functions are not available.
Entering your code
1.Set the remote control to VCR.
2.While holding down the but- ton enter a
3.Release the button
4.Switch off your video recorder by pressing the button
5.If the VCR does not switch off, try one of the other codes correspon- ding to your video recorder.
When you change the bat- teries, you will have to enter the maker’s code againUsing the Video Recorder
Set the remote control to
VCR.
To switch your video recorder on or off
These buttons have the same functions as some of those on your video recorder remote control (if it is from our brand)
To change programme
Selecting appliances connected to the VCR (AV1, AV2...)
Go to programmes and enter numerical values in
menus
VCR functions
(rewind, play, forward, ...)