CS606_EN 6/12/06 2:08 PM Page 16
Settings
Settings
EN Setting the Timer
You can turn on/off the unit or record TUNER at
preset times by setting the timer.
1.Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display.
6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.
Timer
Volume
10
Sleep Timer
You can select the time interval in minutes before the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep timer is activated.
View Remaining Sleep Time |
| |
EN | ||
When sleep is activated, press SLEEP once to | ||
| ||
view remaining sleep time. |
| |
Adjust Sleep Time |
| |
Press SLEEP again when the remaining sleep time |
| |
is displayed to change sleep time. |
|
Timer
On 00:00A
2.For setting time, press or to set the hour and then press TIMER to shift to minute digits.
3.Press or to set the minute.
4.Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting.
Timer
On 00:00A
Off 00:00P
7.Press TIMER to save settings.
Press to quit setting.
The timer is automatically activated once timer setting is saved
Tips:
“TUNER REC” settings are for Program Recording. For more information, see
paragraph below.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon is displayed when timer is activated.
Program Recording
Note:
Sleep is automatically
Sound Features
Volume Control | Using Preset Equalizer Curves |
Rotate the volume control on the main unit or | Press EQ to toggle among FLAT, ROCK, POP, JAZZ, |
5.Press TIMER to select source. Press or to select TUNER / TUNER REC / DISC / USB.
Use Program Recording to preset the unit to record your favorite radio program.
Choose TUNER REC as the source to record radio
press VOL | or | on the remote control to | CLASSIC and CUSTOM. The display shows your |
adjust volume level. The volume level shows | selection briefly and the relative icon lights on | ||
briefly on the display. | the display. |
Timer
Source
Tuner
If TUNER REC is selected, press or to select the preset station.
at the preset time. Make sure the mp3 player is connected and have enough memory space.
Bass Boost
Press B.BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon lights on the display when it is activated.
Muting Audio
Press on the remote to cut the sound (Remote Only). MUTE flashes on the display.
Creating a Custom Curve
1.Press EQ to select CUSTOM mode.
2.While CUSTOM is displayed, press or to cycle among displayed bass and treble range levels.
3.While BAS and TRE is displayed, adjust volume control to set the associated gain between
4.Press EQ to exit.
Custom
BAS +02
TRE 00
9 |
|
|
| 10 |
|
|
|
|
|