Manual channel set-up

Press the VCR key on your remote control.

Press the MENU key.

1 The Installation line is already selected. Press OK. Select Manual set up, and confirm with OK.

With Wfirst select Reception and then choose

2 CH or CC with Cor B(CH stands for the channels received via your aerial antenna and CC for the cable network programmes).

3 Press Wto select the Autosearch line.

To start channel search, press Cor B(you may also

4 make a direct input with the number keys 0 to 9). When a channel is found, the picture appears.

If the picture quality is poor:

5 Make use of the fine-tuning (</>) with W, then Cor B.

If the programme is scrambled (i.e you need a

6 decoder), press the DEC. key on the remote control

(the symbol is then displayed on the screen).

7 Select Pr and give the channel a number with the 0 to 9 keys (example: 0, 1 for PrI).

8 Press OK to store this number.

10