Technicolor - Thomson FV 400 L Setting of date and time

3 From the TV User Manual, follow the instructions to find the VCR signal.

As soon as you have found the output channel of the VCR, a message comes up on the TV screen.

4 Note:When the picture quality is poor (snowy or torn image), change the output channel of the VCR with the PR+/PR- keys (when doing so, the picture will disappear until you return the TV set to the new channel.

Store the output signal found on an unused TV programme

5 number, following your TV instruction book.

Note: Remember this TV programme number as you will have to use it to watch the playback of your VCR tapes or TV programme.

6 Press OK key.

7

8

You will be informed by a message that your VCR is searching and storing the channels that can be received in your region.

You’ll have to wait a while until this procedure is completed.

Setting of date and time

Date and time may not be correct

1 If date and time are correct, press EXIT to leave the menus.

If not, set the clock by means of the number keys (0 to

2 9). Press key B, type in time and date in the following order: hour, minutes, day, month, year.

3 Confirm with OK and press EXIT to leave.

8