Advanced functions
settings | Return |
| |
AV1 name | DECOD. | ||
| AV1 video input | RGB... | |
AV | AV2 name | VCR1 | |
AV2 video input | |||
| |||
| AV3 name | CAMCOR | |
| AV3 video input | Video... | |
|
|
| |
| Select the name of the device |
| |
| connected to AV1. |
| |
|
|
|
Configuring AV sockets
You can configure your TV set according to the equipment you connect to it.
Display the OVERVIEW menu using the MENU button. Select the Installation option and press OK to confirm.The Install menu appears. Select the AV settings option and press OK to confirm.
Follow the messages on screen and the instructions below explaining how to configure the AV sockets.
AV1 name: Use the | buttons to select from the list the name of the equipment |
| |
connected to this socket. If the factory preset names do not suit you, select AV1__ and | EN | ||
enter another one, following the screen messages. | |||
| |||
AV1 video input: use the | buttons to select from the list the type of video signal |
| |
| |||
transmitted by the equipment connected to the AV1 socket. |
| ||
Note: Select RGB if no picture is displayed when you connect a games console.
Repeat the above procedure to configure the AV2 and AV3 sockets.
AV4 name: enter the name of the equipment connected to this socket.
Note:This option is only displayed if your equipment has a synchro scan socket.
AV5 name: enter the name of the equipment connected to this socket.
Note:This option is only displayed if your equipment has a DVI socket.
Press EXIT to close the menu. Select the option Return and press OK to return to the
Install menu.
19
