Power Supply
| 1 |
1 | Power switch |
|
The power switch has two positions:
On | : | Power to camera is switched on. |
Off | : | Power to camera is switched off. |
When you switch off the power, the access rights that were obtained by the use of the PIN code are disabled and the camera starts at the assigned user level when switched on again.
Security and Access
Series |
100 |
LDK |
1 |
1Smart card slot
Insert your smart card into this slot with the chip on the card facing the front of the camera. Push the card home until it fits snugly.
There are two types of card; an owner card and a user card. Both cards store operator files and scene files.
The owner card can be used to change the user level of the camera. The user level determines which set of controls and functions can be changed by the camera operator. Refer to Section 6 for more information on the smart card.
A smart card is not required for normal operation of the camera.
Note
Only use an original Thomson camera card.
Store the owner card in a safe place.
Operator's Manual LDK 100 Camera Head | Location of Controls and Functions |
