Technicolor - Thomson mkiiLDK 23hs Intercom routing switch, Headset Programme volume control

1Intercom routing switch

A 3-position switch which routes the cameraman's intercom microphone signal to engineering (ENG) or production (PROD), or turns off the intercom.

If the camera is used in triax mode, the momentary VTR switch at the front of the camera, on the lens or on a shot box can be used to route the cameraman's intercom microphone signal to production regardless of the position of this switch.

2Headset Programme volume control

This control varies the volume of the programme intercom signal to the cameraman's headset.

3Headset Engineering volume control

This control varies the volume of the engineering intercom signal to the cameraman's headset.

4Headset Production volume control

This control varies the volume of the production intercom signal to the cameraman's headset when the selection switch (5) is not in the FRONT position.

5Production volume control selection

A 2-position switch for the production intercom which selects control of the volume at the front of the camera (9) or control of the volume at the rear (4).

6Cameraman intercom connector

Headsets with dynamic or carbon type microphones can be connected to this socket (see installation manual).

7Audio Ch. 1 microphone connector

Balanced input for high quality microphone. A phantom power supply (48V) can be internally selected (see installation manual). The gain of this audio channel can be controlled from the CPU.

8Audio Ch. 2 microphone connector

Balanced input for high quality microphone. A phantom power supply (48V) can be internally selected (see installation manual). The gain of this audio channel can be controlled from the CPU.

9Headphone volume

This control varies the volume of the production intercom signal to the cameraman's headset when the selection switch (5) is in the FRONT position.

Location of Controls and Functions Operator's Manual LDK 23HS mkII - HS Camera System 4-11