Manuals / Kodak / Computer Equipment / Projector

Kodak DP2000 manual Audio Menu, Tint, Color, Blank Screen, Reset All, Volume

Models: DP2000

1 76

Download 76 pages 18.53 Kb

Page 33

Tint

Using the Projector

Tint

The tint adjusts the red-green color balance in the projected image. Changing the Tint setting has no effect on PAL or SECAM video sources.

•Press the left navigation button on the keypad to increase the amount of green in the image.

•Press the right navigation button on the keypad to increase the amount of red in the image.

Color

The color setting adjusts a video image from black and white to fully saturated color.

•Press the left mouse button to decrease the amount of color in the image.

•Press the right mouse button to increase the amount of color in the image.

Blank Screen

Blank Screen determines what color is displayed when there is no active source and when the projector is in standby. Click the left or right navigation button to toggle between blue and black.

Reset All

Click the left or right navigation button to reset all the options (except Language, Video Standard, Rear Projection, and Standby Time) in all the menus to their original settings.

Audio Menu

Volume

Note: Changing the volume from the menu is the same as changing it using the keypad.

•Press the left navigation button to decrease the volume.

•Press the right navigation button to increase the volume. Volume adjustments you make are saved for each source.

27

Image 33

Kodak DP2000 manual Audio Menu, Tint, Color, Blank Screen, Reset All, Volume

Contents

User’s Guide KODAK DP2000 Digital Projector with KODAK Image Manager SoftwarePage FCC Warning Safety CertificationsCanada EN 55022 WarningPage Safety Instructions Table of ContentsSetting up the Projector Using the ProjectorAppendix B Appendix AAppendix C Appendix DSafety Instructions Safety DefinitionsSafety Symbols Important Operating Considerations Safety TermsBattery Use Page Image Resolution IntroductionCompatibility Unpacking the Projector User’s Guide , Quick Start Guideand Online User Guide CD Usage Guidelines Projector FeaturesOnline Services If You Need AssistanceFaxed Information Customer Support Warranty Positioning the Projector Setting up the ProjectorConnecting to a Computer Connecting the ProjectorDo you want to play your computer’s audio on the projector? To connect to a computerIf your computer has a PS/2 connector, use the PS/2 mouse cable To connect to a video player Connecting to a Video Player4. Plug the other end of the audio adapter into the audio cable Starting the Projector Turning Off the Projector Basic Image Adjustment Using the ProjectorAdjusting the Projector Using the Projector The Remote Controldisk mouse simulates the right mouse button simulates the left mouse buttonPress anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button the button on the bottom simulates your computer’s left mouse button. See “Using the Keypad and Remote Control” starting on page 23 for a description of the four function buttons Using the Keypad and Remote Control The Remote Control ButtonsThe Keypad Buttons Lamp on/off keypad only Volume keypad onlyMenu or Computer and VideoKHQWKHPHQXRSWLRQLVDFWLYH XVHWKHVHEXWWRQVWRQDYLJDWH WKURXJKWKHPHQXV Using the On-Screen MenusDisplay Menu BrightnessContrast Reset All Audio MenuVolume TintImage Menu Auto ImageAuto Resize Manual Sync Manual TrackingHorizontal position Controls Menu Vertical positionVideo Standard Standby Time Default SourceRear Projection Auto Source SelectPlug and Play Display MessagesDisplay Startup Screen Status Menu Language MenuLamp hours used Computer resolutionHorizontal refresh rate Vertical refresh rateImage Manager Settings Kodak MenuUsing the Image Manager The new contrast setting is immediately applied to the image1. Click the Kodak menu Cleaning the Lens Maintenance TroubleshootingSURMHFWRUWRRYHUKHDW Replacing the Projection LampMaintenance & Troubleshooting Be careful when removing the lamp module so that it does not break5. Loosen the two non-removable screws on the outside of the module 6. Grasp the pull tab and lift out the lamp module3OXJLQWKHSRZHUFRUGWRWXUQWKHSURMHFWRUEDFNRQ 9. Tighten the screws on the outside of the module5HSODFHWKHODPSGRRUE\LQVHUWLQJWKHKRRNVRQWKHUHDURIWKH 7RUHVHWWKHODPSKRXUFRXQWHULQWKH6WDWXVZLQGRZSUHVVDQGUsing the Kensington Lock Replacing the Batteries in the Remote ControlProblem Nothing on projection screen TroubleshootingProblem Color or text not being projected Problem The screen resolution is not rightProblem Only the start-up screen displays Problem Image is too wide or narrow for screenProblem Image is out of focus Problem the projector displays vertical lines, “bleeding” or spots Problem Image and menus are reversed left to rightProblem no sound Problem Image is “noisy” or streakedProblem Lamp shuts off Problem Lamp seems to be getting dimmerPage Temperature SpecificationsDimensions WeightOptics Input Power RequirementsLamp Audio InputKey command Portable and Laptop Activation ChartAppendix B ComputerKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activateKey command Key commandComputer de-activatePage Appendix C Using Video Mirroring with a PowerBook ComputerUsing SimulScan Projected Image Size Appendix DImage Size, Width and Height for DP2000-minimum image size Image Size, Width and Height for DP2000-maximum image sizeIndex L lamp H helpPage Page WARRANTY REPAIR COVERAGE WARRANTY TIME PERIODLIMITATIONS APPLICATION SUPPORTHOW TO OBTAIN SERVICE Page Kodak is a trademark of Eastman Kodak Company Eastman Kodak Company 343 State Street Rochester, New YorkPN 3H7969 9/99