User’s Guide KODAK DP2000 Digital Projector
Turning Off the Projector
To completely turn off the projector, unplug it. If you want to turn the projector back on immediately, you must allow about a minute for the lamp to cool. The lamp won’t light if it’s too hot.
Note: Lamp life will be extended if you turn the lamp off, then wait
1 minute while the lamp cools before unplugging the projector. The Lamp LED will light green when the lamp has cooled. See page 24 for details on the Lamp LED.
If you want to turn off the display for a short period of time, press the
button on the keypad or remote. This blanks the screen for fifteen minutes, but keeps the projector running. (You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 31 for details.) After 15 minutes, the lamp goes out (the
projector keeps running). To exit standby mode, press the 
button again. (It may take several seconds for the projection lamp to reach full power and project the image again.)
18
