Kodak DP2000 manual Setting up the Projector, Positioning the Projector

Setting up the Projector

This section describes how to:

•determine where to position the projector

•connect the projector to a computer or a video player

•turn on and turn off the projector

If you are experienced in setting up presentation systems, use the Quick Start card that came with the KODAK DP2000 Digital Projector. Otherwise, follow the procedures described here.

Positioning the Projector

Note: If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 31 to reverse the image.

1.Make sure your projector is on a flat surface. It must be within 10 feet (3 m) of your power source and within 6 feet (1.8 m) of your computer.

2.Position the projector the desired distance from the screen.

•The distance from the lens of the projector to the screen and the zoom setting determine the size of the projected image as shown here. For more information about image sizes at minimum and maximum zoom settings, see “Projected Image Size” on page 61.

						13
						10	t
						.	f
							(
						3		4
						f			m
						t
							(			)
			7				3
								.
		6	.					1
				8					m
		.			f
		2			t					)
	3		f		(
			t		2
2	.			( .
	2			1		4
.	f				.
					9	m
5
	t
f		(				)
					m .
t .						)
	(	9
						.
	.	m
	8
			)
	m .
		)
		.

20 ft.

5 ft.	12 ft.	6 m
	3.7 m
1.5 m

3. Make sure the projector and your computer are turned off.

11